A draper header moves cut crop to the combine on wide rubber belts, while an auger header uses a metal screw auger to pull the crop toward the feeder house. That difference changes how crop reaches the feeder house. Draper belts carry crop across the header, while an auger gathers it toward the center. For North Dakota small grains, soybeans and canola, the right answer in the draper header vs auger header decision depends on your crop mix, your acres per day and how you plan to move the header down the road.
Key Takeaways
- The core difference is how crop is conveyed: belts on a draper, a screw auger on an auger platform.
- For soybeans, the flex cutterbar matters more than the conveying style, and both header types offer flex versions.
- Size the header to your combine's capacity and field shape, then plan transport before you buy.
What Is the Difference Between a Draper and an Auger Header?
Both headers cut the crop, gather it and feed it into the combine. The difference is the middle step. For a closer look at Bison Machinery's Gleaner line, visit the Gleaner combine lineup.
On an auger header, the reel pushes cut crop onto a pan, and an auger, often with retractable fingers, moves it toward the center. On a draper header, side belts carry the crop to a center belt, which then lifts it into the feeder house. If you are new to combine header types, it helps to walk a few machines in person and compare build styles.
You will also hear two other terms. A rigid header holds the cutterbar at a fixed height, which suits standing small grains. A flex header lets the cutterbar follow ground contours, which matters for low-podded soybeans. Flex versions exist in both styles, so a flex draper and a flex auger platform are both available choices rather than competing categories.
How Each Header Feeds the Combine
Feeding is where operators usually notice the difference. Belts carry crop with less rolling, so material tends to arrive at the feeder house spread out rather than bunched. Augers move crop by turning it, so heavy or damp material can rope up and arrive in slugs, especially on wider platforms.
Augers are not a weak choice. Their simpler design has fewer belts and guides to track and tension, and many operators prefer them in green, stringy material.
Which Header Works Best for Soybeans and Small Grains?
Crop fit should drive the decision more than brand loyalty. Here is how the two styles generally line up against the main North Dakota crops.
| Crop | Draper header | Auger header |
|---|---|---|
| Wheat, barley, durum | Common at wide widths for even feeding. | Widely used, often at narrower widths. |
| Soybeans | Used with a flex draper cutterbar. | Used with a flex header; watch low pods. |
| Canola, straight cut | Extensions and vertical knives are common additions. | Used; pod shatter needs careful setup. |
| Tough, weedy or lodged fields | Check belt condition and crop flow in damp or heavy material. | Check crop flow and feeding in the field conditions you expect. |
| Upkeep points | Belts, guides and tracking to check. | Auger, fingers and drive to check. |
Soybeans sit in the middle, where the flex cutterbar matters more than the conveying style. For small grains and canola, ask how consistently the header feeds your combine at the ground speed you actually run.
Canola and Small Grains Notes
Straight-cut canola rewards a gentle, even feed because dry pods shatter easily. Many producers add a header extension to catch material that falls forward of the cutterbar. For small grains, a flat, even crop mat helps the rotor or cylinder see a steadier load instead of surges.
What Size Header Do You Need?
Header width should match combine capacity, field shape and travel logistics, not just acreage. Use this order when sizing a platform:
- Start with the combine. Check the separator capacity and horsepower rating your machine is built for. A header that exceeds the combine's practical capacity may force slower ground speed or uneven feeding in heavy crop.
- Look at your heaviest crop. Size for your highest-yielding field, not your average one, because that is where feed rate limits you.
- Measure your fields. Long, square fields reward extra width. Short rows, wetlands and tree lines mean more turning, where a wide header gains less.
- If you use controlled traffic, compare header width with your planter and sprayer passes before choosing a platform.
- Confirm you can move it. Decide how the header will travel between farms before you buy, including trailer size and the roads you use.
Wider is not automatically faster. If a wide header forces you to slow down to avoid overloading the combine, you have traded ground speed for width and gained little. If you are weighing an older machine against a newer one, review our used combine buying checklist for a separate guide to inspecting a used combine.
How Do You Transport a Wide Header?
A dedicated header trailer carries the header lengthwise behind the towing vehicle, which reduces transport width compared with carrying the header across the front of the combine.
A few habits make header moves easier to plan:
- Match the trailer rating to the header's weight and width before the first move.
- Secure the header at the manufacturer's tie-down points, then recheck straps after the first few miles.
- Confirm current North Dakota width, lighting, marking and permit rules with the state before moving oversize loads.
- Plan the route around bridges, narrow approaches and field entrances.
Transport planning is part of the purchase, not an afterthought. Bison Machinery carries Unverferth header trailers alongside combines. Use the trailer listing as a starting point when planning header transport.
Frequently Asked Questions
Compare the price and condition of the specific headers, then weigh crop mix, acres, combine capacity, cutterbar setup, compatibility, maintenance requirements and transport needs. The better value is the header that fits your operation without creating feeding or transport problems.
Often yes, but check the feeder house dimensions, drive couplers, hydraulic and electrical connections, and whether an adapter is required. Weight matters too, since a wide draper can be heavier than the auger platform your combine was originally fitted with.
Both have a cutterbar that follows ground contours for low-growing crops like soybeans. The difference is conveying: a flex header typically uses an auger behind the cutterbar, while a flex draper uses belts to carry crop to the center.
Green, tangled or damp material can challenge either header. Review the header's crop-handling design, condition and recommended settings for the crop and field conditions you expect, and ask how the machine has performed in similar fields.
For road travel, plan header transport before purchase. A header trailer can support that planning, but follow the header and trailer manufacturer instructions and confirm current North Dakota width, lighting, marking and permit requirements before moving the load.
Belts need regular tension and tracking checks, plus inspection for cuts, edge wear and worn guides. Keeping rocks and buildup out of the belt path helps. Budget for belt replacement as a normal wear item rather than an unexpected repair.
Choosing Between a Draper Header vs Auger Header
The draper header vs auger header choice depends on what you harvest, how many acres you cover in a day, and how you move equipment between fields. Walk both styles, check how each feeds in your heaviest crop, and confirm the flex cutterbar setup you need for soybeans. Size the header to your combine's capacity first, then plan transport before harvest starts rather than during it.
Bison Machinery has been a family-owned North Dakota equipment dealer since 1974, with locations in Jamestown and Casselton, factory-trained technicians and parts support at both branches. To compare headers, combines and header trailers for your operation, visit Bison Machinery.




