2026 SITREX MKE18

SITREX MAGNUM EVOLUTION "V" RAKE — MKE 18 The standard version has rake wheels with a diameter of 55" (1.4m) and tines with a diameter of 0.28" (7mm). As an alternative, and with no changes to the machine structure needed, it is possible to mount optional rake wheels with a diameter of 60" (1.52m) and tines with a diameter of 0.3" (7.5 mm). Each wheel, regardless of the diameter, is equipped with 40 tines made of top-quality spring steel. A lever acting on a sprocket equipped with a locking mechanism enables the width of the swath to be adjusted easily and rapidly from about 3' (0.91 m) to 6' (1.8 m). Alternatively, this function can be performed by an optional hydraulic device enabling the adjustment of the swath directly from the tractor. DISCOVER THE MAIN FEATURES OF THE V RAKES "MAGNUM EVOLUTION". • Wheel in forward position. • Independent finger wheels. • Tubular frame 150×100. • Finger wheel ground pressure adjustment. • Rear telescopic crossbar for variable swaths. Quality Workmanship for Clean Forage for Healthy Animals. Better forage means more milk production and healthier animals. The quality of the forage is fundamental for animal health and for good company revenues. Great Productivity, Attention to Detail. In order to adapt to extreme field conditions, there are rakes that must be solid and sturdy. This is why the drawbar and the rake wings have been made using a large framework of structural tubing to make them tough and fully reliable over time, however hard they are made to work. Despite their size, these machines are easy to handle and transport and very user-friendly. Furthermore, the 10-wheel machine can be transformed into a 12-wheel machine with the appropriate extension kit. Similarly, the 14-wheel machine can be extended into a 16-wheel machine and the 18-wheel machine can be extended into a 20-wheel machine with the appropriate extension kit. OPTIONAL ACCESSORY KITS Rear Crossbar Hydraulic Opening Kit — This kit enables the length of the swath to be adjusted from about 3' (0.91 m) to about 6' (1.8 m) directly from the tractor. This is especially useful both for adapting work rapidly to the different quantities of forage present in the field and to adapt to the different working widths of the baling machines. It is easy to install even on machines with mechanical levers since it uses the same coupling points. Single-Side Opening Kit — A valve, simple to fit and to handle, can be set so as to choose only one of the wings of the hay rake, the one on the right or on the left, as required, without having to install or remove any parts on the machine. The kit is extremely simple to use, and enables easy overturning of damp swathes or those that have not dried out completely, so as to speed up the drying process. Rear Tandem Wheel Kit — This kit enables the machine to pass safely over rough terrain. A strong oscillating support adapts perfectly to the various different conditions of the terrain. There are two wheels on each side, at the suitable distance from one another, so that one of the pair is always resting on the highest part of the ground, even when there are furrows or holes, allowing the machine to move smoothly. The Central Kicker Wheel Kit — This kit enables the machine to pass safely over rough terrain. A strong oscillating support adapts perfectly to the various different conditions of the terrain. There are two wheels on each side, at the suitable distance from one another, so that one of the pair is always resting on the highest part of the ground, even when there are furrows or holes, allowing the machine to move smoothly. 60" Finger Wheels Specifications and data shown are subject to change with or without prior notice.