2026 BOBCAT T7X

BOBCAT – T7X – COMPACT TRACK LOADER The award-winning Bobcat® T7X is the world’s first all-electric compact track loader. With jaw-dropping torque and cutting-edge design, this emissions-free powerhouse delivers the benefits of owning and operating a battery-powered compact loader without sacrificing performance. • Totally battery powered with no hydraulics • Instantaneous torque up to three times that of traditional loaders • Near-silent operation and low vibration • Drastically reduced maintenance and operation costs • Cutting-edge software offers countless ways to optimize performance • Up to six hours of continuous runtime • 12-hour charge time with 240V, 40A outlet • On-demand multi-functioning power • No horsepower lag or performance trade-offs • Intelligent power management system preserves runtime and battery life • Controls are consistent with diesel-powered equipment • Greatly reduced noise and vibration improves experience for operators and bystanders 72.6-KILOWATT-HOUR LITHIUM-ION BATTERY The all-electric T7X is powered by a 72.6-kilowatt-hour lithium-ion battery. On a single charge, get up to six hours of continuous runtime on the T7X compact track loader. After a recharge, using a common 240-volt outlet, the T7X is ready to take on the tough jobs all over again. A color-coded power indicator on the control panel clearly displays the available power, from blue (fully charged) to yellow (partial charge) and finally to red (low charge). POWER MANAGEMENT SYSTEM The intelligent power management system is programmed to sense workload requirements and delivers the electrical power needed for the job at hand. The high-efficiency electrical system preserves energy for when it’s needed and extends the machine’s runtime. It only delivers electric power while you’re putting the loader to work. You won't waste standby energy keeping the system active. Energy doesn't pass through multiple systems, enabling the highest efficiency possible. INNOVATIVE ELECTRIC MOTORS AND BALL-SCREW ACTUATORS Unlike other compact loaders, the T7X doesn't rely on hydraulic systems to transfer power to the machine’s work group. Instead, they each feature a simple electrical drive system consisting of four ball-screw actuators that deliver precise power requirements for every workload. The electric-powered work group is much more power efficient than hydraulic systems. ON-DEMAND MULTI-FUNCTIONING PERFORMANCE With the T7X, you can simultaneously power the drive, lift and tilt functions without the noticeable power lag that is common among diesel-hydraulic machines. Operators notice a distinct power increase over traditional loaders, with no performance tradeoffs when operating multiple functions at once. INSTANTANEOUS TORQUE Together, the battery and electrical powertrain generate incredible performance characteristics, with instantaneous torque that’s as much as three times greater than traditional loaders. The battery, drive motors and ball-screw actuators deliver full torque at 0 rpm. An intelligent force-control feature protects the T7X from overload damage, ensuring long-term durability. PRECISE AND FAST CONTROL RESPONSE The intelligent power management system is programmed to sense workload requirements and delivers the electrical power needed for the job at hand. The high-efficiency electrical system preserves energy for when it’s needed and extends the machine’s runtime. It only delivers electric power while you’re putting the loader to work. MORE LIFT AND TILT FORCE These all-electric loaders generate more lift and tilt power than their diesel equivalents for fast cycle times and more work done per day. THREE CONTROL MODES Three control modes give you tailored work group and drive response while discharging only the amount of power the operator wants for the job at hand. The control modes allow you to choose how the drive and work group respond to joystick movement. Whether you like a more gradual response; quick, instant feedback; or something in between, three different settings put you in control. MODE 1 (ECO MODE ONLY) This mode reduces the speed of movement for precise operation and minimal power usage. MODE 2 (ECO AND NORMAL) Provides a great balance of speed and control for most working conditions. MODE 3 (ECO, NORMAL AND PEAK) Gives you the quickest response for the fastest cycle times. THREE POWER MODES Three power ranges change the available power according to your work requirements and operating preferences. The throttle control dial sets your maximum power level so you can meet work demands and preserve battery life throughout the day. Each variable setting unleashes precise machine performance, from zero to maximum power. ECO Increases efficiency and easily handles a wide variety of tasks. NORMAL Provides a familiar range of power for all kinds of tough jobs. PEAK POWER Brings on the best power performance for your most difficult tasks. FEATURE-RICH SOFTWARE CAPABILITIES The all-electric power system supports new opportunities to upgrade product features via wireless software updates not available on traditional loaders. With the T7X, you enjoy software connectivity to the machine and access to data produced as it works. You can use this data to change machine preferences and tune the performance to your specific needs. OPERATES LIKE ANY OTHER BOBCAT LOADER The T7X provides a familiar environment for any Bobcat equipment operator, with controls and instrumentation that are consistent with its diesel-powered counterparts. LIFT ARM FLOAT Engage the float function to easily follow ground contours. MULTI-BAR LUG TRACKS Bobcat rubber tracks are made using a combination of natural and synthetic rubbers to maximize wear. Bobcat tracks won’t just withstand tough environments; their design also provides a smooth ride by distributing weight over a larger surface area without sacrificing your loader’s capabilities. The multi-bar lug pattern provides increased traction on a wide variety of surfaces while reducing overall ground disturbance. Multi-bar lug tracks are also available in an optional non-marking rubber compound. STANDARD SOLID-MOUNTED UNDERCARRIAGE This simple, strong undercarriage design offers solid-mounted durability with fewer overall parts. It offers consistent performance for accurate grading as well. IMMEDIATE COLD WEATHER PERFORMANCE When working in winter or in cold environments, you can unplug the machine and go right to work. There is no waiting for an engine or hydraulics to warm up. Operators will also appreciate how quickly the cab heats and cools regardless of the outside temperature. MACHINE IQ Using Machine IQ, you can remotely track information that enhances maintenance, security and performance. No matter where you are, you can find out where your equipment is, how efficiently it’s running and whether it needs service. Machine IQ wireless communications connects you to your machine’s information from virtually anywhere and at any time. BACKUP ALARM AND HORN The motion alarm (audio signal) activates when the loader is traveling in reverse. These loaders are also equipped with a horn for added operational awareness. 8-INCH DISPLAY The easy-to-read 8-inch cab display provides full-featured machine interaction and monitoring capabilities. Diagnostic and detailed operation information, which can be accessed through the display, includes monitoring, troubleshooting and error conditions. PREMIUM LED LIGHTS At night or in dark working conditions, your productivity can still shine. The bright, efficient and reliable LED lights provide far-reaching visibility when the light level is low. These front and rear lights give you a wider beam to illuminate more of the jobsite. This premium package also includes side lights with integrated front and rear blue strobe lighting. The side lights provide bright, far-reaching illumination and minimal power draw as well. MACHINE ACTIVE BLUE STROBE LIGHTS Blue strobe lights on the front, side and rear of the machine indicate the machine is in operation for enhanced bystander awareness. A backup alarm also supports operational awareness.